RBH Sound SA-250DSP Instrukcja Obsługi Pobierz pdf (Strona 4)

RBH Sound Subwoofer Ampliﬁer 2 Owner’s Manual

Installing Rack Mount Ears

If you plan to install your subwoofer ampliﬁer into a standard 19-inch rack,

you must install the supplied rack ears.

1. Using the three screws, attach the supplied rack ears to the

subwoofer ampliﬁer. If required, the 4 feet on the bottom

of the ampliﬁer can also be removed at this time by

unscrewing the mounting screws located in the center

of each foot.

3. Due to the weight of the subwoofer ampliﬁer,

it is recommended that rear supports be

secured to the rear rack rails. Hardware

to do this is not supplied with the

ampliﬁer and is speciﬁc to the

type and depth of rack you

are using.

Introduction

Congratulations on your purchase of an RBH Sound Subwoofer Ampliﬁer! Your subwoofer

ampliﬁer is the result of many years of research and development dedicated to producing

powerful, accurate bass in home audio systems. This manual contains operating procedures

and speciﬁcations. We recommend you thoroughly read through the material contained in

this manual before connecting your ampliﬁer. This will ensure you have an understanding

of how to setup and operate your ampliﬁer for optimum performance.

The RBH Sound SA-250DSP/SA-500DSP subwoofer ampliﬁer is a high performance, class D

subwoofer ampliﬁer capable of delivering a minimum of 250W/500W of clean power at 4

ohms. It uses sound processing technology which allows you to tailor the performance of the

subwoofer to better match the environment in which it is installed. Both ampliﬁers feature

a large LCD display as well as a turn-and-push controller for DSP conﬁguration. On the front

panel there are indicators for power and standby, clipping and signal presence.

CAUTION! The subwoofer ampliﬁer is convection cooled and does not use a fan. For this

reason, ensure there is adequate ventilation above and below the subwoofer ampliﬁer

when rack mounted. Avoid placing heat generating equipment below it in the rack.

If the subwoofer ampliﬁer does not receive enough ventilation, it may overheat and

switch to standby mode.

Installing Front Rack Ears

1 2 3 4 5 6 7 8 9 ... 15 16

Brak uwag

RBH Sound SA-250DSP Instrukcja Obsługi Strona 4